Neon R/T L4-2.0L VIN F HO (2001)
Connecting Rod: Description and Operation
DESCRIPTION
NOTE: The engine DOES NOT have provisions for a free wheeling valve train. Non free wheeling valve train means, in the event of a broken timing
belt, pistons will contact the valves.
The pistons are made of a cast aluminum alloy. The pistons have pressed-in pins attached to forged powdered metal connecting rods. The pistons pin
is offset 1 mm (0.0394 inch) towards the thrust side of the piston. The connecting rods are a cracked cap design and are not repairable. Hex head cap
screws are used to provide alignment and durability in the assembly. The pistons and connecting rods are serviced as an assembly.
OPERATION
The piston and connecting rod is the link between the combustion force to the crankshaft.