Neon R/T L4-2.0L VIN F HO (2001)
Intake Manifold: Service and Repair
Intake Manifold - Standard
REMOVAL
WARNING: RELEASE FUEL SYSTEM PRESSURE BEFORE SERVICING FUEL SYSTEM COMPONENTS. SERVICE VEHICLES IN
WELL VENTILATED AREAS AND AVOID IGNITION SOURCES. NEVER SMOKE WHILE SERVICING THE VEHICLE.
1. Disconnect negative cable from battery.
2. Remove the inlet air duct from intake manifold to throttle body.
3. Perform fuel system pressure release procedure before attempting any repairs.
WARNING: WRAP SHOP TOWELS AROUND FUEL HOSE TO CATCH ANY GASOLINE SPILLAGE
4. Disconnect fuel supply line quick connect at the fuel tube assembly.
5. Disengage and remove fuel injector cover from retaining pins by pulling outward on cover (Fig. 134).
6. Remove fuel rail assembly attaching screws and remove fuel rail assembly from engine. Cover injector holes with suitable covering.
CAUTION: Do not set fuel injectors on their tips, damage may occur to the injectors
