Neon R/T L4-2.0L VIN F HO (2001)
13. Disconnect the knock sensor (Fig. 146).
14. Disconnect brake booster hose (Fig. 147).
15. Remove intake manifold.
INSTALLATION - HIGH OUTPUT ENGINE
1. Clean manifold sealing surfaces.
2. If separated, install lower to upper manifold gasket and tighten bolt in sequence shown in (Fig. 148) to 12 Nm (105 in. lbs.).
3. Position new manifold gasket on cylinder head mounting surface, piloting on the 2 attaching studs.
4. Loosely position manifold in engine compartment.
5. Insert engine wiring harness between middle intake runners.
6. Connect the knock sensor (Fig. 146).
7. Connect brake booster hose (Fig. 147).
