Neon R/T L4-2.0L VIN F HO (2001)
8. Position manifold to cylinder head and install fasteners. Tighten fasteners in sequence shown in (Fig. 149) to 12 Nm (105 in. lbs.).
9. Install bolt securing lower manifold to bracket (Fig. 144). Tighten bolt to 28 Nm (250 in. lbs.).
10. Connect MAP sensor and MTV actuator electrical connection (Fig. 145).
11. Install engine oil dipstick
12. Connect inlet air duct to manifold and throttle body.
13. Connect PCV hose to manifold (Fig. 145).
14. Connect fuel injector connectors and harness to fuel rail.
15. Install fuel rail cover (Fig. 143).
16. Connect fuel supply line to fuel rail.
17. Connect negative cable to battery.
