Neon R/T L4-2.0L VIN F HO (2001)
Air Door Actuator / Motor: Description and Operation
Fig.17 A/C Vacuum Line
Fig.18 Recirculation Air Door Vacuum Actuator
The Neon uses vacuum to operate only the recirculation door. All other controls are cable. When vacuum is supplied to the actuator, the door moves to
the Recirculation position. The actuator is spring loaded so the door moves to the Outside-air position when there is no vacuum supplied. The operation
of the door can be viewed by removing the blower motor and looking up into the unit inlet.
Normally, vacuum is supplied to the actuator by placing the Circulation control knob in the Recirculation position. The Mode and the circulation control
are mechanically interlocked so the circulation control cannot be placed in the RECIRC position if the mode control is at or between the mix and defrost
positions. Vacuum is supplied to the actuator only when circulation control is at the RECIRC position. If the circulation control is between the outside air
position and RECIRC position the system will be in outside air. If the circulation control is in the RECIRC position and the mode control is moved from
the floor to the defrost positions, the circulation control will move from the RECIRC position, to the outside air position beginning at the mix position.
This is to prevent window fogging.
