Neon R/T L4-2.0L VIN F HO (2001)
Air Door Cable: Adjustments
Fig.21 HVAC Housing Cables
1. Engage cable to actuator arm on temperature door and attach to housing.
Fig.16 HVAC Control Head Cables
2. Attach other end of cable to instrument panel control.
3. Turn the temperature knob completely counterclockwise.
4. While holding the knob in the counterclockwise position, pull on the gray casing of the temperature cable. This will take up any free play in the
cable and index the temperature door to the temperature knob.
5. Then snap the cable hold down clip into position.
6. Remount control.
