Neon R/T L4-20L VIN F HO (2001) Blower Motor Resistor Location
Blower Motor Resistor: Service and Repair
REMOVAL
CAUTION: Stay clear of the blower motor and resistor block (Hot). Do not operate the blower motor with the resistor block removed.
1. Remove windshield wipers. Refer to: "Wiper and Washer Systems : Wiper Arm : Service and Repair" See: Wiper and Washer
Systems/Wiper Arm/Service and Repair
2. Remove cowl top screen.
Fig.10 Blower Motor Resistors
3. Disconnect the resistor block wiring connector.
4. Remove/unsnap resistor block from vehicle.
INSTALLATION
CAUTION: Stay clear of the blower motor and resistor block (Hot). Do not operate the blower motor with the resistor block removed.
Fig.11 Blower Motor Resistor Block
1. Snap the new Blower Motor Resistor Block into place.
2. Connect the resistor block wiring connector.
3. Install the cowl top screen.