Neon R/T L4-2.0L VIN F HO (2001)
Compressor Clutch Coil: Service and Repair
REMOVAL
Compressor assembly must be removed from mounting. Although, refrigerant discharge is not necessary.
Fig.1 Compressor Shaft Bolt And Clutch Plate
1. Remove the compressor shaft bolt. A band type oil filter removal tool can be placed around the clutch plate to aid in bolt removal.
Fig.2 Clutch Plate And Shim(s)
2. Tap the clutch plate with a plastic hammer and remove clutch plate and shim(s).
NOTE: Use care not to lose any of the shim(s).
CAUTION: Do not use screwdrivers between the clutch plate assembly and pulley to remove front plate as this may damage the front plate
assembly.
