Neon R/T L4-2.0L VIN F HO (2001)
Fig.21 Heater Core Coolant Supply Lines
8. Install the heater core coolant supply hoses on the heater core.
9. Install the expansion valve, gasket and retaining bolts. Torque the bolts to 11 Nm (97 in. lbs.).
Fig.22 Expansion Valve Position And Orientation
10. Connect the electrical connector on the bottom of the expansion valve.
CAUTION: Be certain the refrigerant line sealing O-rings are well lubricated and free of tears.
11. Install the refrigerant lines and retaining bolt. Torque the bolt to 23 Nm (203 in. lbs.).
12. Install the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Instrument Panel
Service Procedures, Instrument Panel Assembly Replacement, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Instrument Panel Assembly
13. Evacuate the refrigerant system.
14. Charge the refrigerant system.
15. Fill the cooling system .
16. Connect the negative battery cable.
