Neon R/T L4-2.0L VIN F HO (2001)
Fuse Block: Description and Operation
An electrical Fuse Block is located in the left end of the instrument panel. It serves to simplify and centralize numerous electrical components, as well as
to distribute electrical current to many of the accessory systems in the vehicle.
The Fuse Block is positioned on a mounting bracket up and under the left instrument panel. It is secured by two screws. The fuse Hock is concealed
behind the left instrument panel end cap. The left end cap is a snap-fit access cover that conceals the fuse block fuses. A fuse layout placard is on the
back of the end cap to ensure proper fuse identification.
The fuse block houses blade-type fuses and automatic resetting circuit breakers. Internal connection of all the fuse block circuits is accomplished by an
intricate network of hard wiring and bus bars.
The fuses and circuit breakers are available for service replacement. The fuse block unit cannot be repaired and is only serviced as an assembly. If any
circuit or the fuse block housing is faulty or damaged, the entire fuse block and instrument panel wire harness assembly must be replaced.
For complete circuit diagrams, refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector
repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness
connectors, splices and grounds.
