Neon R/T L4-2.0L VIN F HO (2001)
Fuel Injector: Service and Repair
Injector Connector Replacement
REMOVAL
Fig. 9 Fuel Injectors
Fig. 10 Remove/Install Injector Connector
1. Disconnect electrical connectors at the fuel injectors (Fig. 9). To remove connector refer to (Fig. 10). Pull the red colored slider away from
injector (1). While pulling the slider, depress tab (2) and remove connector (3) from injector. The factory fuel injection wiring harness is
numerically tagged (INJ 1, INJ 2, etc.) for injector position identification. If harness is not tagged, make note of wiring location before removal.