Neon R/T L4-2.0L VIN F HO (2001)
Crankshaft Position Sensor: Service and Repair
Fig. 6 Crankshaft Position Sensor
REMOVAL
The crankshaft position sensor mounts to the engine block behind the generator, just above the oil filter.
1. Disconnect electrical connector from crankshaft position sensor.
2. Remove sensor mounting screw. Remove sensor.
INSTALLATION
The crankshaft position sensor mounts to the engine block behind the generator, just above the oil filter.
1. Install sensor. Install sensor mounting screw and tighten.
2. Connect electrical connector to crankshaft position sensor.
