Neon R/T L4-2.0L VIN F HO (2001)
2. Remove the two bolts attaching shoulder belt adjuster to B-pillar.
3. Remove shoulder belt adjuster from vehicle.
INSTALLATION
CAUTION:
-
Front seat belt assemblies must be replaced after a collision.
-
Front seat belt adjuster must be in the lowest position when Installing adjuster knob.
1. Place into position the shoulder belt adjuster.
2. Install bolts attaching shoulder belt adjuster to B-pillar. Tighten all seat belt bolts to 40 Nm (30 ft. lbs.) torque.
3. Install B-pillar trim.