Neon R/T L4-2.0L VIN F HO (2001)
Glove Box Lamp Switch: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Open glove box door.
3. Pull downward on lamp/switch assembly to disengage tabs from instrument panel.
4. Pull bulb from socket.
5. Disconnect wire connector from lamp and remove glove box lamp/switch.
INSTALLATION
1. Push bulb into socket.
2. Place lamp/switch assembly into position.
3. Connect wire connector to the lamp/switch.
4. Push lamp/switch assembly to lock tabs.
5. Check lamp operation, and close glove box door.
6. Connect the battery negative cable.
