Neon R/T L4-2.0L VIN F HO (2001)
Fig.4 Lower Mounting Bolt
9. Remove the upper and lower mounting bolt (Fig. 4) and move generator OFF of pivot bracket.
10. Remove pivot bracket.
Fig.5 Generator
11. Remove Generator (Fig. 5) through wheel well.
INSTALLATION
1. Install generator (Fig. 5) through wheel well.
2. Install lower pivot bracket and tighten bolts to 54 Nm (40 ft. lbs.).
3. Loose install the upper and lower mounting bolts (Fig. 4) .
4. Connect the generator field circuit wiring connector. Push the RED locking tab to lock.
5. Install the B+ terminal nut and wire.
6. Install the generator drive belt.
7. Lower vehicle.
8. Tension belt.
9. Tighten adjustment bolt.
10. Tighten the jam nut.
11. Raise vehicle and support.
12. Tighten lower mounting bolt and tighten bolts to 54 Nm (40 ft. lbs.).
13. Install splash shield (Fig. 3).
14. Lower vehicle.
15. Connect battery cable (Fig. 2).
