Neon R/T L4-2.0L VIN F HO (2001)
3. Rotate the hub so the hole in the hub that wheel mounting stud was removed from is facing away from brake caliper lower rail on steering knuckle.
Install one half of the Bearing Splitter, Special Tool 1130, between the hub and the bearing retainer plate.
NOTE: Align the threaded hole in this first half of the bearing splitter with the caliper rail on the steering knuckle.
4. Install the remaining pieces of Bearing Splitter, Special Tool 1130, on the steering knuckle. Hand tighten the nuts to hold bearing splitter in place
on steering knuckle.
