Neon R/T L4-2.0L VIN F HO (2001)
4. If the vehicle is equipped with Antilock Brakes (ABS), attach the ABS wheel speed sensor to the rear of the strut (rearward ear) using its mounting
screw. Tighten the mounting screw to a torque of 13 Nm (120 inch lbs.).
5. Attach the ground strap to the rear of the strut (forward ear) using its mounting screw. Tighten the mounting screw to a torque of 13 Nm (120 inch
lbs.).
6. Install the tire and wheel assembly. Install and tighten the wheel mounting nuts in proper sequence until all nuts are torqued to half specification.
Repeat the tightening sequence to the full specified torque of 135 Nm (100 ft. lbs.).
7. Lower the vehicle.
