Neon R/T L4-2.0L VIN F HO (2001)
Wheel Bearing: Service and Repair
Front
DISASSEMBLY (WHEEL BEARING AND HUB)
NOTE: The removal and installation of the wheel bearing and hub from the steering knuckle is only to be done with the steering knuckle removed from
the vehicle. Removal of the wheel bearing from the steering knuckle must be done using the following procedure.
1. Remove steering knuckle, hub, and wheel bearing as an assembly from the vehicle.
2. Using Remover, Special Tool 4150A, press one wheel mounting stud out of hub flange. Rotate the hub to align the removed wheel mounting stud
with the notch in bearing retainer plate. Remove the wheel mounting stud from the hub.