Neon R/T L4-2.0L VIN F HO (2001)
Fluid Line/Hose: Service and Repair
Transmission Cooler Lines Removal and Installation
REMOVAL
1. Loosen hose clamps.
2. Remove hoses from transaxle (Fig. 3) and cooler fittings (Fig. 4).
INSTALLATION
1. Install hoses to transaxle (Fig. 3) and cooler fittings (Fig. 4).
2. Position hose clamps on fittings and tighten to 3 Nm (28 inch lbs.).
