Neon R/T L4-2.0L VIN F HO (2001)
9. Rotate the ignition key to the "OFF" or "ON/ RUN" position (Fig. 209).
10. Squeeze the interlock cable locking tab. Remove the cable from the interlock housing (Fig. 210).
11. Release cable from retaining clips and remove through opening under steering column.
INSTALLATION
CAUTION: When installing interlock cable assembly, care must be taken not to bend exposed cable wire and slug at shifter end of cable.
1. Route interlock cable through hole in instrument panel below steering column and around to gear shifter assembly.
2. Turn the ignition key to the "OFF" or "ON/ RUN" position (Fig. 209).
