Neon R/T L4-2.0L VIN F HO (2001)
8. Remove air cleaner/throttle body assembly (Fig. 98) as follows:
a. Disconnect Proportional Purge Solenoid (PPS) and crankcase vent hose from throttle body.
b. Disconnect the Throttle Position Sensor (TPS) and Idle Air Control (IAC) connectors.
c. Disconnect throttle body air duct from intake manifold.
d. Remove mounting bolt and nut (Fig. 98) and partially remove air cleaner assembly.
e. Disconnect accelerator and speed control (if equipped) cables after the assembly is removed from position. Remove air cleaner assembly from
vehicle.
9. Disconnect cables from the shift levers at the transaxle (Fig. 99).
CAUTION: Pry up with equal force on both sides of shifter cable isolator bushings to avoid damaging cable isolator bushings.
Remove cable retaining clips and remove cables from bracket (Fig. 99).
10. Raise vehicle on hoist.
