Nitro 2WD V6-4.0L (2007)
Rear Door Exterior Handle: Service and Repair
Installation
INSTALLATION
1. Install the handle and front exterior handle nut to the door and tighten to tighten to 4.5 Nm (40 in. lbs.).
2. Install the carrier plate to the door.
NOTE: The door glass must be in the full up position in order to access the rear exterior handle nut. Use light and a magnetic socket on the
rear nut to prevent from dropping the nut into the door assembly.
3. Install the rear nut (1) to the exterior handle and tighten to 4.5 Nm (40 in. lbs.).