Nitro 2WD V6-4.0L (2007)
Headliner: Service and Repair
Headliner - Installation
INSTALLATION
CAUTION: It is necessary to fold the corner and the side up between the C and D pillar area of the headliner to remove from the vehicle. The
corner must be folded up and not down to avoid damaging the headliner.
1. Install the headliner (2) to the roof (1).
2. Connect the lift gate washer drain hose (4) to the Center High Mounted Stop Lamp (CHMSL) and install to the lift gate.
3. Connect the electrical connector for the lift gate harness (1).
4. Install the clip (3) to the header roof (2).