Nitro 2WD V6-4.0L (2007)
14. Connect the rear drain tube at the sunroof (1).
15. Connect the front drain tube (3) at the cowl side panel (5).
16. Install the shield (4) to the A-Pillar.
17. Install the front drain tube (3) to the clips (1) on the A-pillar.
18. Connect the front drain tube (3) at the sunroof (2).
19. Install the wire harness.
20. Connect battery negative cable.
21. If equipped, install the overhead console.
22. Perform the sunroof motor teach procedure.
23. Test sunroof operation, adjust glass as necessary.
24. Install the headliner.
