Nitro 2WD V6-4.0L (2007)
5. Install the four screws attaching the ABM module to the HCU. Tighten the mounting screws to 2 Nm (17 in. lbs.) torque.
6. If the mounting bracket needs to be installed, install the mounting pins in the HCU as necessary and tighten to 14 Nm (125 in. lbs.) torque. Insert
the mounting pins into the grommets mounted in the bracket, then install the single mounting bolt. Tighten the mounting bolt to 14 Nm (125 in.
lbs.) torque.
7. Install the HCU in the vehicle.