Nitro 2WD V6-4.0L (2007)
15. Tighten the wheel mounting nuts in the proper sequence until all nuts are torqued to half the specified torque. Then repeat the tightening sequence
to the full specified torque of 129 Nm (95 ft. lbs.).
16. Lower vehicle.
CAUTION: Before moving vehicle, pump brake pedal several times to ensure the vehicle has a firm enough pedal to stop the vehicle.
NOTE: After parking brake lining replacement, it is recommended that the parking brake system be conditioned prior to use. This is done by
making one stop from 25 mph on dry pavement or concrete using light to moderate force on the parking brake hand lever.
17. Road test the vehicle to ensure proper function of the vehicle's brake system.
