Nitro 2WD V6-4.0L (2007)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Vibration Damper - Installation
INSTALLATION
1. Install crankshaft damper using Special Tools C-4685-C1 (5.9 in.) Bolt, with Nut and Thrust Bearing from 6792, and 6792-1 Installer.
2. Install crankshaft damper bolt. Torque bolt to 95 Nm (70 ft. lbs.) while holding damper with Special Tool 9365.
3. Lower vehicle.
4. Install accessory drive belt (7).
5. Connect negative battery cable.
