Nitro 2WD V6-4.0L (2007)
4.0L ENGINE
1. Remove combination coolant recovery/washer reservoir.
2. Insert a suitable square drive ratchet into the square hole on belt tensioner arm.
3. Rotate accessory drive belt tensioner clockwise to release belt tension.
4. Remove accessory drive belt.
4.0L Engine With Service Update
4.0L ENGINE WITH SERVICE UPDATE
NOTE: This belt routing procedure must be used on 4.0L equipped vehicles recently serviced with the updated idler pulley design.
NOTE: Fan removed for clarity.
NOTE: Power steering belt removed for clarity.
1. Remove the combination coolant recovery/washer reservoir.
2. Insert a suitable square drive ratchet into the square hole on the belt tensioner arm (1).
3. Rotate the accessory drive belt tensioner (1) clockwise to release the belt tension.
CAUTION: Do not let the tensioner arm snap back to the freearm position, severe damage may occur to the tensioner.
4. Remove the accessory drive belt (5).
4.0L Engine
4.0L ENGINE
