Nitro 2WD V6-4.0L (2007)
Blower Motor Resistor: Service and Repair
Installation
INSTALLATION
NOTE: Typical resistor shown. RHD model similar.
1. Position the blower motor resistor (1) into the HVAC housing (4).
2. Install the two screws (3) that secure the blower motor resistor to the HVAC housing. Tighten the screws to 1.2 Nm (10 in. lbs.).
3. Connect the wire harness connector (2) to the blower motor resistor.
4. Close the glove box door.
5. Reconnect the negative battery cable.