Nitro 2WD V6-4.0L (2007)
NOTE: Rotate and tilt the A/C discharge line as necessary to disconnect it from the A/C condenser.
8. Remove the nut (4) that secures the A/C discharge line (5) to the A/C condenser (3) and disconnect the discharge line.
9. Remove the two bolts (2) that secure the A/C condenser to the right side of the radiator (1).
10. Carefully lift the A/C condenser straight up to disengage the condenser mounting brackets from the radiator and remove the condenser from the
vehicle.
11. If required, remove the A/C receiver/drier from the A/C condenser.
12. Remove and discard the O-ring seals and gasket and install plugs in, or tape over the opened refrigerant line fittings and the condenser and
receiver/drier ports.