Nitro 2WD V6-4.0L (2007)
Power Distribution Module: Description and Operation
Module-Inverter
Description
DESCRIPTION
The inverter module is located under the right rear seat cushion. The A/C outlet is mounted in the rear of the center floor console. The inverter module
provides A/C power for user accessories when the 115 Volt AC outlet switch (4) in the instrument panel center stack (1) is in the "ON" position. The
inverter converts the 12 Volt DC from the vehicle battery system to a 115 Volt AC output. The outlet switch is part of the accessory switch bank
assembly and is not available for service as an individual part. If the switch is damaged or inoperative the complete accessory switch bank assembly must
be replaced, for the appropriate procedure.
Operation
OPERATION
The 115 volt AC power outlet switch receives 12 volts from the Totally Integrated Power Module (TIPM) and passes it as an enable signal to the
inverter module. The inverter module also receives 12 volts via the TIPM and inverts this to a 115 volt AC output. The enable signal received from the
power outlet switch enables the inverter to convert the received voltage and pass it to the power outlet to power external devices.
