Nitro 2WD V6-4.0L (2007)
Measure the resistance between ground and the (K31) Fuel Pump Control circuit in the TIPM C1 harness connector.
Is the resistance below 100 ohms?
Yes
-
Repair the short to ground in the (K31) Fuel Pump Control circuit.
-
Perform the POWERTRAIN VERIFICATION TEST. See: Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code
Tests and Associated Procedures/Verification Tests/Powertrain Verification Test
No
-
Go To 11
8. (N1) FUEL PUMP OUTPUT CIRCUIT OPEN