Nitro 2WD V6-4.0L (2007)
Manifold Pressure/Vacuum Sensor: Service and Repair
Removal
REMOVAL - 4.0L
The Manifold Absolute Pressure (MAP) sensor (2) is mounted into the top/front of the upper half of the intake manifold.
An O-ring is used to seal the sensor to the intake manifold.
1. Disconnect electrical connector (1) at sensor (2).
2. Clean area around MAP sensor.
3. Rotate sensor 1/4 turn counter-clockwise until tangs align.
4. Pull MAP sensor from intake manifold.
5. Check condition of sensor O-ring.
