Nitro 2WD V6-4.0L (2007)
Manifold Pressure/Vacuum Sensor: Service and Repair
Installation
INSTALLATION - 4.0L
The Manifold Absolute Pressure (MAP) sensor (2) is mounted into the top/front of the upper half of the intake manifold.
An O-ring is used to seal the sensor to the intake manifold.
1. Check condition of sensor O-ring.
2. Position MAP sensor into intake manifold. Note locating tangs.
3. Rotate sensor 1/4 turn clockwise.
4. Connect electrical connector (1) at sensor (2).