Nitro 2WD V6-4.0L (2007)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Removal
Front
FRONT
1. Raise and support the vehicle.
2. Remove the front part wheel well housing cover and pull it back toward the tire to gain access to the transponder.
3. Remove the mounting nuts (2) for the transponder (1) from the mounting bracket.
4. Disconnect the electrical connector (3) and remove the transponder (1) from the vehicle.
Rear
REAR
1. Raise and support the vehicle.
2. Disconnect the electrical connector (1).
3. Remove the mounting nuts (3) for the transponder (4).
4. Remove the transponder (4) from the bracket (2).