Nitro 2WD V6-4.0L (2007)
Heated Glass Element Relay: Service and Repair
Installation
INSTALLATION
NOTE: Refer to the fuse and relay map on the inside of the totally integrated power module (TIPM) cover for EBL relay location.
1. Position the EBL relay (2) to the TIPM (1).
2. Align the EBL relay terminals with the terminal cavities in the TIPM receptacle and push down firmly on the relay until the terminals are fully
seated.
3. Close the TIPM cover.
4. Reconnect the negative battery cable.
