Nitro 2WD V6-4.0L (2007)
6. Position the Totally Integrated Power Module (TIPM) positive cable (2) onto the mounting stud (3) and install the retaining nut (1). Tighten the
nut to 9 - 11 Nm (80 - 100 in. lbs.). Close the TIPM cover (4).
7. Connect the battery cable assembly routing clips to the inner fender.
8. Position the negative battery cable (6) onto the mounting stud (7). Install the mounting stud onto the inner fender and tighten to 12 Nm (9 ft. lbs.)
9. Connect the battery positive cable (1). Tighten the cable clamp nut to 5 Nm (45 in. lbs.)
10. Connect the battery negative cable (2). Tighten the cable clamp nut to 5 Nm (45 in. lbs.)
