Nitro 2WD V6-4.0L (2007)
5. Position the TIPM (2) into the engine compartment.
6. Connect each of the seven TIPM wire harness connectors as shown.
7. Position the TIPM (1) onto the mounting bracket (2) and push down until the mounting clips are fully seated onto the mounting tabs (3).
8. Position the TIPM positive cable (2) onto the mounting stud (3) and install the retaining nut (1). Tighten the nut to 9 - 11 Nm (80 - 100 in. lbs.).
