Nitro 2WD V6-4.0L (2007)
Power Distribution Module: Service and Repair
Module-Totally Integrated Power
Removal
REMOVAL
1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Open the Totally Integrated Power Module (TIPM) cover (4).
4. Remove the TIPM positive cable retaining nut (1) and remove the cable (2) from the mounting stud (3).
5. Using an appropriate flat bladed tool, depress the four mounting clips to disengage and remove the TIPM housing (1) from the TIPM bracket
mounting tabs (3).