Nitro 2WD V6-4.0L (2007)
Control Arm Bushing: Service and Repair
Removal
LOWER CONTROL ARM PIVOT BUSHING
1. Remove the lower control arm.
2. Secure the control arm in a vise.
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and
insure proper operation during the removal and installation process.
3. Press the bushing (4) out using special tools C-4212F (Press) (1), 9334-5 (Receiver) (2) and 9603-3 (Driver) (5).
