Nitro 2WD V6-4.0L (2007)
21. Remove remaining retainers (1, 2).
22. Remove all valves and springs.
23. Cleanliness through entire disassembly and assembly of the valve body cannot be overemphasized. When disassembling, each part should be
washed in a suitable solvent, then dried by compressed air. Do not wipe parts with shop towels. All mating surfaces in the valve body are
accurately machined; therefore, careful handling of all parts must be exercised to avoid nicks or burrs.
Assembly
ASSEMBLY
NOTE: If the valve body assembly is being reconditioned or replaced, it is necessary to perform the Quick Learn Procedure using the scan tool.
