Nitro 2WD V6-4.0L (2007)
Axle Bearing: Service and Repair
Installation
INSTALLATION
1. Remove any old sealer/burrs from axle tube.
2. Install axle shaft bearing with Installer C-4198 (1) and Handle C-4171 (2). Drive bearing in until tool contacts the axle tube.
NOTE: Bearing is installed with the bearing part number against installer.
3. Coat new axle seal lip with axle lubricant. Install seal with Installer 8493 and Handle C-4171.
4. Install axle shaft (1) in axle tube (2).
