Nitro 2WD V6-4.0L (2007)
e. Install the red wire terminal from the overlay wiring harness into cavity 26 of the green TIPM connector (Figure 12).
CAUTION:
Do not force the terminal into the connector. It is keyed and
will only install in one direction.
f.
Snap the red connector lock back into the green TIPM connector (Figure 11).
g. Install the black plastic wire cover onto the back of the green TIPM connector and apply electrical tape to the harness as required.
6. Install the pink wire and dark green wire from the overlay wiring harness into the black TIPM connector using the following procedure: