Nitro 4WD V6-3.7L (2011)
a. Clean the front door sill area on the right and left side with isopropyl alcohol as shown in (Fig. 1).
b. Remove the adhesive liner from the stainless steel door sill and center it between the indicator lines shown in (Fig. 2 ) (Fig. 3).
NOTE:
Apply firm pressure to fascia plate upon installation to ensure proper adhesive wet out.
4. Install front fascia plate.
a. Clean the front fascia with isopropyl alcohol as shown in (Fig. 4).
b. Remove the adhesive liner from the fascia plate and install at the center of the fascia as shown in (Fig. 5).
NOTE:
Apply firm pressure to fascia plate upon installation to ensure proper adhesive wet out.