Nitro 4WD V6-4.0L (2007)
8. Raise the vehicle.
9. Install the shift cable to the shift cable support bracket.
10. Shift the transmission into PARK. PARK is the rearmost detent position on the transmission manual shift lever.
11. Snap the shift cable onto the transmission manual shift lever.
12. Lower vehicle.
13. Verify that the shift lever is in the PARK position.
14. Tighten the adjustment screw to 7 Nm (65 in.lbs.).
15. Verify correct shifter operation.
16. Install any console parts removed for access to shift lever assembly and shift cable.