RAM 1500 Truck 2WD V6-3.7L VIN K (2003)
1 - A-Pillar
2 - A-Pillar Trim
3 - Trim Plug
4 - Bolts (2)
Installation
1. Position the bottom A-Pillar locating tabs and install the A-Pillar trim.
2. Install the bolts and tighten to 6Nm (55 in. lbs.)
A-Pillar Trim and Grab Handle
A-PILLAR TRIM/GRAB HANDLE
REMOVAL
1. Using a small flat-bladed tool, carefully open the two fastener covers (3) located in the a-pillar trim panel (2).
2. Remove the two bolts (4) that secure the a-pillar trim panel to the a-pillar (1) and remove the trim panel.
INSTALLATION