RAM 1500 Truck 2WD V6-3.7L VIN K (2003)
3. Using Special Tool 8512-A, press damper onto crankshaft (Fig. 59).
4. Install then tighten crankshaft damper bolt to 175 Nm (130 ft. lbs.).
5. Install fan blade assembly (Refer to COOLING / ENGINE / FAN DRIVE VISCOUS CLUTCH INSTALLATION).
6. Install radiator upper shroud and tighten fasteners to 11 Nm (95 inch lbs.).
7. Connect electrical connector for shroud fan.
8. Install radiator upper hose.
9. Install accessory drive belt (Refer to COOLING / ACCESSORY DRIVE / DRIVE BELTS INSTALLATION).
10. Refill cooling system (Refer to COOLING STANDARD PROCEDURE).
11. Connect negative cable to battery.
