RAM 1500 Truck 2WD V6-3.7L VIN K (2003)
Turn Signal Lamp: Service and Repair
Park/Turn Signal Lamp Replacement
PARK/TURN SIGNAL LAMP
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the headlamp unit.
3. Seperate the socket from the headlamp unit.
Fig.18 Pull Bulb From Socket
4. Release the bulb socket locking tabs and seperate the bulb from the socket.
INSTALLATION
1. Install the bulb into the socket.
2. Install the socket into the headlamp unit.
3. Install the headlamp unit
4. Connect the negative battery cable.