RAM 1500 Truck 2WD V6-3.7L VIN K (2003)
Idle Air Control (IAC) Motor: Service and Repair
Fig.20 Idle Air Control Motor - 3.7L V-6
REMOVAL - 3.7L V-6
The Idle Air Control (IAC) motor is located on the side of the throttle body.
1. Remove air resonator box at throttle body.
2. Disconnect electrical connector from IAC motor.
3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body.
INSTALLATION - 3.7L V-6
1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in. lbs.) torque.
3. Install electrical connector.
4. Install air resonator to throttle body.
