dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Radio, Stereo, and Compact Disc|Testing and Inspection > < Standard Speakers|Page 6685
Page 1
background image

Speaker: Description and Operation

DESCRIPTION

STANDARD
The standard equipment speaker system includes speakers in four locations. One full-range 15.2 by 22.9 centimeter (6.0 by 9.0 inch) speaker is
located in each front door. There is also one full-range 13.3 centimeter (5.25 inch) diameter speaker located in each rear cab side panel for the
standard cab and the club cab models, or in each rear door of the quad cab models.

PREMIUM
The optional premium speaker system features Infinity model speakers in six locations. Each of the standard front door speakers are replaced with
Infinity model speakers that include an integral 30 watt dual amplifier. Each of the standard rear speakers is also replaced by an Infinity model
speaker. The premium speaker system also includes an additional Infinity tweeter mounted in the A-pillar garnish moulding. The total available
power of the premium speaker system is about 150 watts.

OPERATION

STANDARD
Each of the four full-range speakers used in the standard speaker system is driven by the amplifier that is integral to the factory-installed radio
receiver. 

PREMIUM
The Infinity speakers used in the premium speaker system are driven by dual amplifiers that are integral to each of the front door speakers. One of
these dual amplifiers drives the front door speaker and the A-pillar mounted tweeter for that side of the vehicle, while the other amplifier drives the
rear speaker for that side of the vehicle. 

FILTER, CHOKE, AND SPEAKER RELAY

DESCRIPTION
Models equipped with the Infinity premium speaker package have a filter, choke, and speaker relay unit. The filter, choke, and speaker relay unit is
mounted to the lower instrument panel center brace, inboard of the Central Timer Module (CTM) and directly above the 16-way data link
connector. The filter, choke, and speaker relay unit can be accessed for service without instrument panel disassembly or removal.

The filter, choke, and speaker relay unit should be checked if there is no sound output noted from the speakers. The filter, choke, and speaker relay
unit cannot be repaired or adjusted and, if faulty or damaged, the unit must be replaced.

OPERATION
The filter, choke, and speaker relay unit is used to control the supply of fused battery current to the front door speaker-mounted dual amplifiers.
The speaker relay is energized by a fused 12 volt output from the radio receiver whenever the radio is turned on. 

Radio, Stereo, and Compact Disc|Testing and Inspection > < Standard Speakers|Page 6685